Inspect/Adjust Weekly; Inspect/Adjust Monthly; Inspect/Adjust Periodically - Invacare Pronto M71 Owner's Operator And Maintenance Manual

Hide thumbs Also See for Pronto M71:

Table of Contents

SECTION 10—SAFETY INSPECTION/TROUBLESHOOTING

Inspect/Adjust Weekly

Inspect tires for flat spots and wear.

Ensure arm pivot points are free of wear and looseness.

Ensure wheel mounting bolts are secure on drive wheels.

Ensure no excessive side movement or binding when drive wheels are lifted and spun

when disengaged (free-wheeling).

Ensure wheel/fork assembly has proper tension when caster is spun. Caster should

come to a gradual stop.

As with any vehicle, wheels and tires should be checked periodically for cracks and

wear and should be replaced as necessary.

Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.

Ensure all caster/wheel/fork/headtube fasteners are secure.

Inspect for any loose hardware on the wheelchair.

Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify

hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

Ensure wheelchair rolls straight (no excessive drag or pull to one side).

Ensure arms are secure but easy to release and adjustment levers engage properly (on

ASBA only).

Ensure adjustable height arms operate and lock securely.

Ensure armrest pads sit flush against arm tubes.

Inspect seat and back upholstery for rips or sagging.

Ensure seat release latch is not worn. Replace if necessary.

Clean upholstery and armrests.

Inspect the seat positioning strap for wear. Replace if worn or damaged.

Inspect charger AC power cord for damage. Replace if necessary.

Check that all labels are present and legible. Replace if necessary.

Inspect electrical components for signs of corrosion. Replace if corroded or damaged.

Pronto® M71™Base with SureStep®

CAUTION

Part No 1143240

Table of Contents