Table of Contents
Advertisement
8
PREPARING TO WORK / HOW TO START - STOP THE ENGINE / USING THE MACHINE
EN
DANGER!
Supply power to the ma-
chine using a differential switch (RCD Re-
sidual Current Device) with a tripping current
of max. 30 mA.
IMPORTANT
To prevent power supply
outages:
– make sure that the electric system's overall ca-
pacity is adequate;
6. HOW TO START - STOP THE ENGINE
STARTING THE ENGINE (Fig. 12)
Before starting the engine:
– Fasten the extension lead (1) to the cable clamp
on the rear handgrip.
– FIRST connect the power cable plug (2) to the
extension lead (3) and THEN plug the extension
lead into the mains socket (4).
– Take off the bar cover.
– Make sure the bar is not touching the ground or
any other object
To start the engine (Fig. 12):
1. Disengage the chain brake (5) by pulling the
front hand guard towards the front handgrip.
2. Hold the chain-saw firmly with both hands.
3. Press the safety button (6) and then the switch
(7).
7. USING THE MACHINE
WARNING!
For personal safety and
that of others:
1) Do not use the machine without reading
the instructions carefully. Become ac-
quainted with the controls and the proper
use of the machine. Learn how to stop the
engine quickly.
2) Only use the machine for the purpose for
which it was designed, that is for "felling,
bucking and delimbing trees with dimensions
suitable for the length of the bar" or wooden
objects with the same characteristics.
Any other use, such as using accesso-
ries not specified in this manual, may be
hazardous and also damage the machine.
Examples of improper use may include,
All manuals and user guides at all-guides.com
– connect the machine to a mains socket with suf-
– avoid simultaneous use of other electrical appli-
switch, the safety button is also released and the
engine stops.
second to come to a stop after the engine is
switched off.
STOPPING THE ENGINE
To stop the engine:
– Release the switch (7).
– FIRST unplug the extension lead (3) from the
3) Keep in mind that the operator or user is
4) Always wear suitable clothing when us-
ficient amperage;
ances with high power consumption.
NOTE
When you release the
WARNING!
The chain may take one
mains socket (4) and THEN disconnect the
power cable (2) of the machine from the exten-
sion lead (3).
but are not limited to:
– trimming hedges;
– intaglio carving;
– sectioning pallets, crates and various
packing materials;
– sectioning furniture or other materials
with nails, screws or other metal com-
ponents;
– butchering meat;
– using the machine to lift, move or split
objects;
– using the machine while fastened to
fixed supports.
re sponsible for accidents or hazards oc-
curring to other people or their property.
ing the machine. Your dealer can provide
Advertisement
Table of Contents
