Extron electronics MPX Plus 866 A Setup Manual page 18

Command
Audio output volume
Set the audio volume to a specific
value
Example:
Increment volume
Example:
Decrement volume
Read output volume
Save and recall presets
N Presets saved from the front panel are always global ties presets, which are complete, ties only, configurations that overwrite all ties in the
current configuration when recalled).
Presets recalled using any operator interface can be either global ties presets or partial presets.. Partial presets are created in the DSP
Configurator program, and can include audio parameters set in the DSP and only selected ties. When recalled, partial presets overwrite only
those portions of the current configuration that are part of the preset.
N If you try to recall a preset that has not been not saved, the matrix switcher responds with the error code E11.
Save the current configuration as a
global ties preset
Example:
Recall a global ties or partial preset
Example:
X@
N = Output number
X(
= Volume adjustment range
X1)
= Global ties preset or partial preset #
Command
Front panel lock (executive mode)
Lock all front panel functions
Lock advanced front panel functions
Unlock all front panel functions
View lock status
Information requests
Information request
Request part number
Query controller firmware version
Example:
X1!
N = Lock mode
X1@
= Firmware version number to second decimal place (x.xx)
ASCII command Response
(host to switcher) (switcher to host)
X@ X(
* V Out
1*50v
Out01•Vol50
X@
+V Out
1+V
Out01•Vol51
X@
-V Out
X@ X(]
V
X1) ,
Spr
,
Spr09
9
X1) .
Rpr
.
5 Rpr05
01 – 06
00 – 64 (1 dB/step except for 0-to-1, which is 22 dB) (default = 64 [0 dB])
00 - 32
ASCII command Response
(host to switcher) (switcher to host)
1X
Exe1
2X
Exe2
0X
Exe0
X1!]
X
I
V14X12•A14X12
N
60-796-01
X1@]
Q
Q
1.23
0, 1, or 2
Additional description
X@ X(]
•Vol
]
Set output 1 volume to 79%.
X@ X(]
Increase volume by 1 step.
•Vol
]
X@ X(]
Decrease volume by 1 step.
•Vol
X1)]
Command character is a comma.
]
Save current ties as preset 9.
X1)]
Command character is a period.
]
Recall preset 5, which overwrites all
(global ties preset) or some (partial preset)
of the current configuration.
Additional description
]
Enable Lock mode 1.
]
Enable Lock mode 2.
]
Enable Lock mode 0.
]
V14X12 is the video matrix size.
A14X12 is the audio matrix size.
]
]
The factory-installed controller firmware
version is 1.23 (sample value only).