Maintenance - Blizzard 760TR Installation Instructions & Owner's Manual

Maintenance

Check fasteners for tightness. Torque to specifi cations.
Check hoses for wear and leaks.
Check cylinders for leaks; inspect rod ends for corrosion & pitting.
Check cables for wear or fraying (760TR and 860TR models only).
Lubricate all exposed cylinder rod ends with liquid white lithium grease to prevent corrosion.
Check cutting edges and plow shoes for wear.
Clean and lubricate all electrical plugs and connections with dielectric grease. Clean and
install all dust caps prior to storing.
Lubricate all pins and bushings, inner slide box, and A-frame latch with
NLGI Grade 2 multi-purpose lithium complex grease with molybdenum (MPGM) to maintain
consistent operation.
Clean and paint all scratches or exposed metal with BLIZZARD
Check the hydraulic fl uid level. Never mix diff erent types of fl uid.
Change the hydraulic fl uid as specifi ed in your tractor owner's manual.
Check the trip spring adjustment. Properly adjusted tension will allow a sheet of paper to
pass between the 3rd and 4th coils of the spring.
Adjust the wing spring as needed or install an optional second extension spring for increased
return speed.
Pressure wash and dry the entire snowplow prior to storing.
Cover the snowplow with a tarp if stored outside. This will protect your plow from sun fading
and inclement weather which can lead to accelerated corrosion.
Lit. No. B64092, Rev. 09
MAINTENANCE – ALL MODELS
touch-up paint.
®
26
Periodically Yearly
X
X
X
X
X
X
X X
X X
X X
X
X
X
X
X
X
April 15, 2021