Radio - Kenwood KDC-BT660U Instruction Manual

Getting Started
Once you have changed the crossover type, the next time when you turn on
the power, the display shows:
"2-WAY X ' OVER" or "3-WAY X ' OVER"
CONFIRM"
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 29, 30)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
8
ENGLISH
"PRESS" "VOLUME KNOB" "TO

Radio

• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1 Press B SRC repeatedly to select RADIO.
2
Press BAND repeatedly (or press #FM+/ * AM– on the remote control)
to select FM1/FM2/FM3/AM/SW1/SW2.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6)
(or press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency.
3 Press ENT IW to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.