Kenwood KDC-BT660U Instruction Manual page 7

Getting Started
[DISPLAY]
[EASY MENU]
(For
When entering [FUNCTION]...
[ON]: [ZONE 1] illumination changes to white color. ;
[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.
(Page 26)
• [ZONE 2] illumination changes to light blue color when you enter
[FUNCTION], irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 25 for zone identification.
[TUNER SETTING]
[PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/AM/SW1/SW2). ; [MIX]: Memorizes one station for
each preset button, regardless of the selected band.
[SYSTEM]
[KEY BEEP] (Applicable only if [X'OVER] is set to [2WAY].)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[TDF ALARM] (Applicable only if [X'OVER] is set to [2WAY].)
[ON]: Activates the alarm if you forget to detach the faceplate when ACC
is set to OFF. ; [OFF]: Deactivates.
[SOURCE SELECT]
[BT AUDIO SRC]
(For
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables.
(Page 20)
[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)
[CD READ] [1]: Automatically distinguishes between audio file disc and music CD. ;
[2]: Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
/ )
/ )
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<https://www.kenwood.com/cs/ce/>.
• Once you have upgraded the firmware, you are unable to downgrade
the firmware.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[ENGLISH] Select the display language for [FUNCTION] menu and music information
if applicable.
By default, [ENGLISH] is selected.
[TURKCE]
• [TURKCE] is available for
Change the crossover type
1 Press B SRC repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 22.
/
.
ENGLISH
only.
7