Kenwood KDC-BT660U Instruction Manual page 34

Troubleshooting
Symptom Remedy
"NA FILE" Make sure the media (disc/USB) contain supported audio
files. (Page 30, 31)
"COPY PRO" A copy-protected file is played (disc/USB).
"NO DEVICE" Connect a device (USB/iPod/iPhone), and change the source
to USB or iPod USB again.
"NO MUSIC" Connect a device (USB/iPod/iPhone) that contains playable
audio files.
"iPod ERROR" • Reconnect the iPod.
• Reset the iPod.
"MEMORY FULL" You have reached the maximum storage limit of your iPod/
iPhone.
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. (Page 4)
Bluetooth pairing cannot • Make sure you have entered the same PIN code to both the
be made. unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 15)
Echo or noise is • Adjust the microphone unit's position. (Page 14)
heard during a phone • Check the [ECHO CANCEL] setting. (Page 16)
conversation.
Phone sound quality • Reduce the distance between the unit and the Bluetooth
is poor. device.
• Move the car to a place where you can get a better signal
reception.
Voice calling method is • Use voice calling method in a more quiet environment.
not successful. • Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is used.
34
ENGLISH
Symptom Remedy
Sound is being interrupted • Reduce the distance between the unit and the Bluetooth
or skipped during playback audio player.
of a Bluetooth audio player. • Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth • Check whether the connected Bluetooth audio player
audio player cannot be supports Audio/Video Remote Control Profile (AVRCP).
controlled. (Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
"NOT SUPPORT" The connected phone does not support Voice Recognition
feature or phonebook transfer.
"NO ENTRY" There is no registered device connected/found via
Bluetooth.
"ERROR" Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"NO INFO"/"NO DATA" Bluetooth device cannot get the contact information.
"HF ERROR XX"/ Reset the unit and try the operation again. If this does not
"BT ERROR" solve the problem, consult your nearest service center.
"SWITCHING NG" The connected phones might not support phone switching
feature.
The Bluetooth connection Delete the unused registered Bluetooth device from the
between the Bluetooth unit. (Page 19)
device and the unit is
unstable.