Table of Contents
Advertisement
Mounting
Mounting and removing the sensor head
1. Open the protective cover.
2. With the locking lever on the sensor head connector facing up,
insert the connector into the connector opening.
1
2
To remove the connector, press down on the locking lever and pull
the connector out.
Lock lever
Connector cover: Transparent
Connecting and Disconnecting Connectors
(Mounting Connectors)
Insert the Master or Slave Connector into the Amplifier Unit until it
clicks into place.
(Removing Connectors)
1. Slide the slave Amplifier Unit(s) for which the Connector is to be
removed away from the rest of the group.
2. After the Amplifier Unit(s) has been separated, press down on the
lever on the Connector and remove it. (Do not attempt to remove
Connectors without separating them from other Amplifier Units
first.)
Insert
Press down
Lever
Remove
Mounting, Removing and Joining Amplifier Units
(Mounting on DIN Track)
1. Let the hook on the Amplifier Unit's Sensor Head connection side
catch the track.
2. Push the unit until the hook clicks into place.
Sensor Head Connection Side Hook
(Removing from DIN Track)
1. Push the unit in the direction 1.
2. Lift the unit in the direction of arrow 2 while performing step (1).
(Do not attempt to remove Amplifier Units from the DIN track
without separating them first.)
2
(Joining Amplifier Units)
1. Mount the Amplifier Units one at a time onto the DIN track.
2. When using a wire-saving connector, mount the master connector
to A and slave connector to B.
3. Slide the Amplifier Unit until the Amplifier Unit is closely attached.
(Arrow 3) (For the wire-saving connector type, be sure that a
master connector and a slave connector, or a slave connector and
a slave connector are connected.)
4. Use End Plates (PFP-M: separately sold) at the both ends of the
grouped Amplifier Units to prevent them from separating due to
vibration or other cause. (Arrow 4)
5. Tighten the screw on the End Plates using a driver. (Arrow 5)
DIN Track
Tighten the screw
while pressing the End Plate.
E3C-LDA@N
1
A
3
B
5
5
4
13
Advertisement
Table of Contents
