Power Saving Function Of Access Key Fob; Disabling Keyless Access Function - Subaru Crosstrek Hybrid 2022 Owner's Manual

162
Keyless access with push-button start system
the remote keyless entry system.
– Lock or unlock the doors by using
the power door locking switch.
– Open either of the front doors.
& Power saving function of ac-
cess key fob
This function stops the access key fob
from receiving signals and helps minimize
the battery consumption of the access key
fob.
1. Press the " " button twice while hold-
ing the " " button.
1) LED indicator
2. Confirm that the LED indicator blinks 4
times to notify that the setting is complete.
When the access key fob is in the power
save mode, the keyless access function
and push-button start system will not be
available.
To cancel the power save mode, press one
of the buttons on the access key fob.
& Disabling keyless access
function
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, per-
form the procedure described in
"By operating the driver's door"
FP163 to disable the keyless access
function. If you perform the proce-
dure described in "By operating the
access key fob" FP162, the opera-
tion of an implanted pacemaker or
implanted defibrillator may be af-
fected by the radio waves from the
transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the key-
less access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. To start the hybrid system while the
functions are disabled, perform the
procedure described in "Starting the
hybrid system" FP405.
! Disabling functions
! By operating the access key fob
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key fob. For details about registering a PIN
code, refer to "Unlock using PIN Code
Access" FP159.
1. Open the driver's door.
2. Rotate the lock lever toward the lock
position.
3. Press and hold the " " button and A/C
button on the access key fob simulta-