Disassembly Of Printer Mechanism; Removal Ofcarriage Motor - Epson LX-1050+ Service Manual

LX-105O+ Service Manual

3.2.5 Disassembly of Printer Mechanism

This section details the removal of components from the printer mechanism.
3.2.5.1 Removal of Carriage Motor
[Step 1] Remove theprintermechanism (See section 3.2.4).
[Step 2] Disconnect the motor cable from the carriage motor.
[Step 3] Remove the belt tension spring EOO1 from the base frame.
[Step 4] Remove the timingbelt fromthebeltpulley.
[Step 5] Remove the carriage motor mounting plate together with the carriage motor.
Figure 3-11. Carriage Motor Mounting Plate Removal
[Step 6] Remove the two C.B.S-tite (0) (M3 x 6) screws
mounting plate, which secure the carriage motor.
CBS(0) screw
When the carriage motor is removed, perform the following adjustment.
Section 4.1.1 Carriage Motor Backlash Adjustment
4.2 BI-DHWCTIONAL. PRINTER ALIGNMENTADJUSTMENT
Rev. A
I
+
EM-142
EPM
0511
Figure 3-12. Carraige Motor Removal
Disassembly and Assembly
Connector
—CR Motor
Frame
'CR Motor
Helical
Spring
on the rear side of the carriage motor
,
CR Motor Frame
CR Motor
260
CBS(0) Screw
+
3-9