Overview; Required Adjustment - Epson C63, C64, C83, C84 Service Manual

EPSON Stylus C63/64/83/84

2.1 Overview

This section describes the procedure for adjustments required when the printer is
disassembled and assembled for repair or service.

2.1.1 Required Adjustment

If you remove or replace the specific part in your service/repair, you have to perform
the appropriate adjustment as listed Table 5-1 below.
In this printer, it is necessary to perform appropriate adjustment in order to maintain
consistent printing function and quality, eliminate differences of each printer
mechanism's characteristics.Therefore, in case that the combination between the
printer mechanism and the main board changes or the Printhead is replaced during the
repair service, you must input the correct adjustment value into the EEPROM on the
Main board by using the Adjustment program
In case that any parts are removed and assembled on the repair
product while running the Adjustment program, make sure to
turn off the printer.
Adjustment
Flowchart 2-1. Required adjustment flowchart
Overview
Revision A
35