Epson Stylus C84 Software Installation Manual

The Start Here sheet software installation instructions will not work in Mac OS 8.6. Unpack and
connect your printer as described on the Start Here sheet, then follow the steps below.
Install your printer software:
1. Make sure your printer is on, then turn on your Macintosh. Insert the EPSON CD-ROM in your
drive. If the CD window doesn't open automatically, double-click the
2. Scroll down in the CD-ROM window and double-click the
C84 Software Installer
3. Click , click
Continue
to restart your computer.
Restart
4. Open the Chooser.
5. Click the
C84 Series
6. Close the Chooser.
Install your optional software and manual, and register your printer:
1. Double-click the
double-click the
2. Double-click the
follow the instructions on the screen to install Film Factory.
3. When the installation is complete, close the Film Factory folders.
4. Open the
Titles
icon to install the EPSON Printer Information Center.
Installer
5. Close the Manual and Titles folders, then double-click the
folder. Double-click the
Ereg
your printer.
6. At the last screen, click
You're ready to start printing! See the details in your Printer Basics book.
© 2003 Epson America, Inc.
CPD-17000
4047354-00
Macintosh

Read This First

icon.
, then click
Install
icon, click your USB port, and turn on background printing.
CD-ROM icon, if necessary. Scroll down in the CD-ROM window and
EPSON
folder.
Titles
folder, then double-click the
Film Factory
folder again and double-click the
EpsonReg
or close your browser. Then remove the CD-ROM.
Done
®
OS 8.6 Users
Drivers
. When the installation is complete, click
Continue
Film Factory Installer
folder. Double-click the
Manual
Drivers
icon and follow the instructions on the screen to register
CD-ROM icon.
EPSON
folder. Then double-click the
icon and
Manual
folder and double-click the
Printed in USA/Imprimé aux É.-U.
8/03