Programmed Playback - Emerson MS7630 Owner's Manual

PROGRAMMED PLAYBACK

This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP
1.) Press the PROG. button to enter the
Program Mode. The PROG. indicator
and Program number ' 01' flash.
2.) Press the SKIP
select the first track number you wish to
enter in the program memory.
Example: Track Number 8.
3.) When the desired track number appears
on the display, press the PROG. button
again to enter that track in memory. The
program number display advances to
"02".
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the PLAY/PAUSE
begin Programmed Playback. The
PROG. indicator stops flashing and
remains ' on' . Playback will begin with the
first track you programmed and will
continue until the last programmed track
has played.
MS7630_011504.p65
button first before beginning the programming steps below:
or buttons to
button to
14
14 15/1/2004, 10:06