Programmed Playback - Emerson MS9600 Owner's Manual

PROGRAMMED PLAYBACK

The CD changer has a 32 track programmable memory that allows you to select up
to 32 of your favorite tracks from among all the discs in the changer for playback in
any desired order.
Note:
You cannot program the changer while a disc is playing. If a disc is playing press
the STOP button first before beginning the programming steps below. .
1.) Load up to 6 discs in the changer.
2.) Press the PROGRAM button. The MEMORY indicator comes ' On' and the
display appears as follows:
This indicates that disc 6 is in the play
position.
3.) Press the DISC SCAN button or the appropriate DIRECT ACCESS button to
select the disc number that contains the first track you wish to program.
Example: Disc 2. The disc number indicator
changes but the tray does not turn.
4.) Press the (Forward) or
to be programmed.
Example: Track 9.
MS9600_ib_0313.p65
(Reverse) buttons to select the first track number
23
23
MEMORY
CD
TRACK
MEMORY
CD
TRACK
MEMORY
CD
TRACK
25/3/2002, 15:23