Related Manuals for Emerson MS7609
Summary of Contents for Emerson MS7609
- Page 1 MICRO AUDIO SYSTEM with CD PLAYER OWNER'S MANUAL MS7609 Visit our web site at www.emersonradio.com MS7609_ib040303.p65 4/4/2003, 12:13...
-
Page 2: Important Safety Instructions
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrow- WARNING: TO REDUCE THE head symbol, within an equi-... -
Page 3: Before We Begin
If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining service at the end of this Manual. Emerson and Emerson retailers are committed to your satisfaction. Once again, thanks for purchasing this Emerson audio product. -
Page 4: Important Notes
IMPORTANT NOTES • Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas. -
Page 5: Preparation For Use
• If you do dispose of the carton and packing materials, please do so properly. Emerson cares about our environment. • Press the CD DOOR OPEN protection card from the CD mechanism. Discard it. -
Page 6: Right Speaker
RIGHT SPEAKER LEFT SPEAKER RED WIRE RED WIRE BLACK WIRE BLACK WIRE PROTECT YOUR FURNITURE !! This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. -
Page 7: Power Source
POWER SOURCE This system is designed to operate on 120V 60Hz AC house current . Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty.You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. -
Page 8: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS TOP PANEL BACK PANEL 1.) Remote Control SENSOR. 2.) Reverse SKIP/SEARCH 3.) PROGRAM Button. 4.) REPEAT Button. 5.) POWER On/Off Button. 7.) PHONES Jack. 6.) STANDBY LED Indicator. 8.) CD Compartment. 9.) TUNING Control. 10.) AM/FM/FM ST. Selector. MS7609_ib040303.p65 11.) CD/RADIO Selector. -
Page 9: Remote Control
REMOTE CONTROL 1.) POWER Button. 2.) PLAY/PAUSE Button. 3.) RANDOM Button. 4.) REPEAT Button. 5.) Reverse SKIP/SEARCH 6.) VOLUME Button. 7.) Battery Compartment (Back cabinet) 8.) VOLUME Button. 9.) Forward SKIP/SEARCH 10.) MUTE Button. 11.) STOP Button. BATTERY INSTALLATION Insert 2 pcs ‘ AA’ size (Alkaline) batteries (not included) into the battery compartment of the remote controller. - Page 10 NOTES: • To maintain the accuracy and long life of the transmitter, do not press two or more buttons simultaneously. • If the remote control is not to be used for a long time, remove the batteries to prevent possible damage through leaking batteries. •...
-
Page 11: Listening To Radio
OPERATING INSTRUCTIONS LISTENING TO RADIO TUNER INFORMATION This system features a normal AM/FM analog tuning system. Unlike a digital tuner it does not automatically lock in on the exact frequency of a station. However instead of a dial scale and a moving dial pointer we have included a digital frequency display to help you tune more accurately. -
Page 12: Operation
OPERATION 1.) Press the POWER button on the main unit or the remote control. The main display lighting comes ‘ On’ and the STANDBY LED indicator goes ‘ Off’ . 2.) Select the Radio function by switching the CD/RADIO selector to RADIO position. - Page 13 ANTENNA For FM reception there is a built-in FM antenna wire at the rear of the unit. Unravel the wire and move it around to obtain the best reception. The AM bar antenna is inside the cabinet. To improve AM reception, you may have to move or slightly rotate the main unit until you obtain the best reception.
-
Page 14: Playing Compact Discs
PLAYING COMPACT DISCS NORMAL PLAYBACK 1.) Press the POWER button on the main unit or the remote control. The main display lighting comes 'On' and the STANDBY LED indicator goes 'Off'. 2.) Set the CD/RADIO selector to the CD position. Two bars "–... -
Page 15: Pause Control
PAUSE CONTROL To pause temporarily during playback press the PLAY/PAUSE button again. The sound stops and the PLAY indicator flashes, but the disc continues to spin. Press the PLAY/PAUSE more to cancel pause and resume normal playback. The PLAY indicator stops flashing. SKIP/SEARCH ( ) CONTROLS To start playback from a specific track insert... -
Page 16: Repeat Playback
REPEAT PLAYBACK You can repeat either a single track or the entire disc continuously. Repeat function can be activated while the disc is playing or while the disc is stopped, but there must be a disc in the player. To Repeat A Single Track: •... - Page 17 RANDOM PLAYBACK (On Remote Control Only) The Random function can be activated while the disc is playing or while the disc is stopped, but there must be a disc in the player. • Load your disc and wait until the total tracks appear on the display. •...
-
Page 18: Programmed Playback
PROGRAMMED PLAYBACK Notes: • You can program up to 20 tracks on a disc to playback in any desired order. The same track number can be programmed to play several times if desired. • There is no PROGRAM button on the remote control. The PROGRAM button is located on the main unit only. -
Page 19: Programmed Repeat Playback
7.) Press the PLAY/PAUSE programmed playback. The PLAY indicator appears together with the PROGRAM indicator. Playback will begin on the first programmed track and continue until all of the programmed tracks have been played. Note: If the SKIP/SEARCH button are pressed during programmed playback the player will skip forward or back to the next track in the programmed sequence, not the next track on the disc. -
Page 20: Stereo Headphone Jack
MUTE CONTROL (On Remote Control Only) To shut off the sound of the radio or the CD temporarily press the MUTE button on the remote control. The speakers shut off and the STANDBY LED indicator flashes. Press the MUTE button again to cancel mute and restore the sound. The STANDBY LED indicator goes 'Off'. -
Page 21: Care And Maintenance
CARE AND MAINTENANCE COMPACT DISC CARE • To remove a disc from its storage case, press down on the centre of the case and lift the disc outs, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’ s recorded surface with a soft cloth.Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. -
Page 22: Troubleshooting Guide
Insert CD with Iabel side Wipe disc with cloth or use another disc. TO FIND THE LOCATION AND PHONE NUMBER OF YOUR NEAREST SERVICE CENTER PERMITTED TO PERFORM WARRANTY... 1-800-695-0098 PLEASE CALL: 1-800-898-9020 Emerson Radio Corp., Consumer Affairs Dept., 1901 Diplomat Drive, 4/4/2003, 12:13... -
Page 23: Limited Warranty
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $9.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. - Page 24 EMERSON RADIO CORP. EMERSON Part No. : 16-2901 Printed in China 303-01 MS7609_ib040303.p65 4/4/2003, 12:13...