Playing Compact Discs; Normal Playback - Emerson MS7630 Owner's Manual

PLAYING COMPACT DISCS

NOTE: Although this portable CD player can read CD-R and CD-RW discs, in
addition to normal CDs, the playability of CD-R and CD-RW discs may be effected
by the type of software that was used to create the discs, as well as the quality and
condition of the blank media you are using. 100% playability cannot be guaranteed.
This is not an indication of a problem with the player.
• Make sure that the main POWER switch on the back of unit is set to "ON".

NORMAL PLAYBACK

1.) To turn the system ' on' , rotate the POWER ON/OFF-VOLUME control
downwards until a ' click' is heard, and set the Volume to a low level. The POWER
indicator comes ' on' .
2.) Press the CD button to select CD function.
3.) Open the CD door by pressing the PUSH OPEN area on top of CD door. If you
have not already removed the white transit card from the CD player, please
remove it now.
4.) Place your CD on the center spindle with the printed
label side facing up. Close the CD door. The player will
read the Table of Contents and the display will show the
total number of tracks on the disc.
If the disc is damaged or up side down, display shows "0 0".
5.) Press the CD PLAY/PAUSE
on Track 1. The PLAY "Dot" Indicator appears in the
display.
6.) Adjust the VOLUME and BBS controls as desired.
7.) Playback will continue until the end of the disc. When the disc ends the display
again shows the total number of tracks on the disc. You may also stop playback
at any time by pressing the CD STOP
Pause Control
To pause momentarily during playback press the CD PLAY/
PAUSE button again. Playback stops but the disc
continues to spin and the PLAY indicator flashes. Press the
CD PLAY/PAUSE
and resume playback. The PLAY indicator stops flashing.
MS7630_011504.p65
button to begin playback
button once more to cancel Pause
12
12
button.
15/1/2004, 10:06