Step 4 - Exit Delay (Location 230); Step 5 - Primary Entry Delay (Location 231); Step 6 - Setting Siren Time Out Period (Location 17) - Watchguard WGAP864 Quick Installation Manual

Step 4 - Exit Delay (Location 230)

Default value: 30 seconds. Ignore if don't need to change.
Enter: 1479* 230* [Partition Number]* [mmss] *##
Example: 1479* 230* 1* 0100* ## sets exit delay of Partition 1 (Zone1-8) to 1 minute 0 seconds.

Step 5 - Primary Entry Delay (Location 231)

Default value: 30 seconds. Ignore if don't need to change.
Enter: 1479* 231* [Partition Number]* [mmss] *##
Example: 1479* 231* 1* 0100* ## sets entry delay of Partition 1 (Zone1-8) to 1 minute 0 seconds.

Step 6 - Setting Siren Time Out Period (Location 17)

Default value: 2 minutes. Ignore if don't need to change.
Enter: 1479* 17* [Siren Time]* [mmss] *#
Example: 1479* 17* 0130* # sets siren time to 1 minute 30 seconds.
Warning: It is an offence for an intruder alarm to be heard in any neighbouring residence when it sounds for more
than 5 minutes if installed on or after 1 December 1997 NSW.
help.c5k.info
Visit for more information and support
7