How to Use the QTBIX16A Connection Tool
The QTBIX16A connection tool is used to make the physical connection of the
building wiring leads that terminate on the BIX connectors of the office
cross-connect panel. This is a special tool designed for making wire terminations at
a BIX connector and is used as follows:
Handle the tool with care to avoid damaging it. When not in use, it should be
kept in its protective leather sheath.
(1) Set the tool to the CUT or the NO-CUT position, depending on whether you
Figure 9-1
CUT and NO-CUT Positions on the QTBIX16A Connection Tool
Cutting Mechanism
(black blade)
450-0071
Cross-Connections to Distribution Frames and Building 89
need to cut excess wire at the terminal block or you are looping wire to more
than one location. (See Fig. 9-1.)
- CAUTION -
Cut
No-cut
Select
Button
Practice 450-1011-201