Table of Contents
Advertisement
118 Loading/Removing the Tape Cartridge (Cartridge SRU)
Figure 13-4
Inserting the Tape Cartridge into the 1/4-shelf Disk/Tape SRU
Stationary Knob
Keyed slot
Metal Side
Cartridge Tape
Removing a Tape
After use, remove the tape from the SRU as follows:
(1) There are two kinds of mechanisms for releasing the tape:
(2) Remove the tape cartridge from the slot.
(3) Store the tape cartridge in a safe place, free from dust, extreme temperatures,
Practice 450-1011-201
SRU Name
Label
Mass Storage and Cartridge Tape SRUs: Push inward the latch at the right
side of the tape slot (Figure 13-3). The tape cartridge then ejects.
1/4-shelf Disk/Tape SRUs: Push upward the knob located above the tape slot
(Figure 13-4). This unlocks the cartridge.
high humidity, and sources of electrical or magnetic interference.
Push this knob down to lock
the cartridge, up to unlock it.
Advertisement
Table of Contents
