Table of Contents
Advertisement
(8) Firmly grasp the top and bottom of the SRU and remove the unit from the shelf.
Mass Storage SRUs are very heavy for their size. The 350 Megabyte SRU is
especially heavy.
Restarting the System after the Removal of an SRU
After removing an SRU, you will usually install a replacement. When you have
installed the replacement, proceed as follows to restart the system:
(1) Log on as the superuser.
(2) Select System Administrative Services and press ENTER, to make the System
(3) Enter Maintenance Services and remove the following PRUs from service: the
(4) Return to the System Administrative Services Main Menu and reset the system
(5) Enter Maintenance Services and restore the DNC Application Scheduler PRU
Setting the NT4G19EA Power Supply for 115 or 220 Vac Operation 19
Do not touch the rear connectors.
Asdministrative Services Main Menu appear.
DNC Application Scheduler PRU (unit number 8531, configuration number
0000) and the DNC Scheduling Services PRU (unit number 8504, configuration
number 0000). For instructions on how to remove a PRU from service, see
'Maintenance for Program Resource Units' in Part 25 of the Guide to System
Administrative Services, 450-1011-301.
date and time. For instructions on setting the date and time, see 'Changing the
System Date and Time' in Part 3 of the Guide to System Administrative
Services, 450-1011-301.
and the DNC Scheduling Servives PRU to service. For instructions on how to
restore a PRU to service, see 'Maintenance for Program Resource Units' in Part
25 of the Guide to System Administrative Services, 450-1011-301.
- WARNING -
Practice 450-1011-201
Advertisement
Table of Contents
