Dual XHDR6435 Installation & Owner's Manual page 27

Function
Redial Menu
Audio Transfer
Call Waiting
Call Hold
Menu Function
Bluetooth Mode
Auto Connect
Auto Answer
Bluetooth Audio
*See page 7 for Setup Menu navigation.
Bluetooth
To enter last number dialing mode, press
time. The head unit will display "REDIAL MENU."
Press SELECT to cycle through the received, dialed or missed call
categories. Rotate the volume knob to cycle through the last 5 calls
in the selected category.
Press to begin dialing the selected number while it is displayed.
"DIALING" will appear on the head unit display.
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call. Tip: transfer
audio to your mobile device before turning the head unit off.
When there is a second call incoming, press
waiting. The current call will be placed on hold, and the second call
will be active. Press
During a phone call, press
resume the phone call, press
Options
BL'TOOTH Enables the BTM60 Bluetooth Interface Module. The
ON Bluetooth icon will flash every 10 seconds.
BL'TOOTH
Disables Bluetooth support.
OFF
Allows the BTM60 to automatically (re)connect to the
AUTO CON
most recently connected mobile device. Note: Some
ON
mobile devices do not support this feature.
AUTO CON
Disables the auto connect feature. You must press
OFF
every time to connect a mobile device.
AUTO ANS
Disables the auto answer feature. Press
OFF
receive an incoming call.
AUTO ANS All incoming calls will be answered automatically
ON after 2-3 rings without notification.
BT SPKRS
Directs the Bluetooth audio to the front speakers.
FRONT
BT SPKRS
Directs the Bluetooth audio to all 4 speakers.
ALL
XHDR6435 OPERATION
Operation (BTM60)
®
Description
again to return to the first call.
to place the current call on hold. To
again.
Bluetooth
Action
, then press a second
to activate call
Setup Menu
®
to
27