Dual XHDR6435 Installation & Owner's Manual

Dual XHDR6435 Installation & Owner's Manual

Cd receiver with detachable face

Advertisement

XHDR6435
INSTALLATION/OWNER'S MANUAL
CD Receiver with Detachable Face
READY

Advertisement

Table of Contents
loading

Summary of Contents for Dual XHDR6435

  • Page 1 XHDR6435 INSTALLATION/OWNER'S MANUAL CD Receiver with Detachable Face READY...
  • Page 2 XHDR6435 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
  • Page 3: Wiring Diagram

    HDM90 Connection (sold separately) Antenna Connector FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XHDR6435 uses one 10 amp ATM fuse located beside the wiring connector.
  • Page 4: Control Locations - Receiver

    XHDR6435 OPERATION  Control Locations - Receiver Release Talk Mode Power ( ) / Select Display Preset 1 / Repeat Preset 3 / Intro LCD  Icons Folder Name Album Name Song Title File Name Preset 2 / Random Preset 4 / Play / Pause CD Eject...
  • Page 5: Control Locations - Remote

    Scan / HD Seek / Key # Preset 3 / Intro Preset 2 / Random Preset 6 / Folder Up Preset 5 / Folder Down XHDR6435 OPERATION Key 9 Mute / End Call Key 0 / Display Talk Key 8 / Tag...
  • Page 6: General Operation

    XHDR6435 OPERATION General Operation Faceplate Removal Semi-Permanent  Faceplate Installation Power On/Off   Mode Auxiliary Input Steering Wheel Interface  Input  Volume Mute Reset Display Set the Clock Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.
  • Page 7: Setup Menu

    DEMO OFF Demonstration  Mode DEMO ON XHDR6435 OPERATION Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu, then press AUDIO/MENU to cycle through menu options. When desired option appears in the display, rotate the volume knob left/right to adjust or activate the desired function. Press ESC to exit the menu at any time.
  • Page 8 XHDR6435 OPERATION General Operation Escape Press ESC to exit any menu adjustment mode. Audio Press AUDIO/MENU momentarily to select between Bass, Treble, Balance, Fader, EQ, Subwoofer* and Source Volume Level. BASS TREBLE BALANCE FADER SUBWOOFER* SOURCE LEVEL Bass Press AUDIO/MENU until BASS appears, then rotate the volume knob left/right to adjust (-6 minimum / +6...
  • Page 9: Am/Fm Tuner Operation

    Display When using the XHDR6435 without the optional HDM90, press DISP to toggle the display between the following options: Seek Tuning Press TUNE to seek the next strong station. Manual Tuning Press TUNE frequency up or down one step at a time. Press and hold to advance quickly.
  • Page 10 XHDR6435 OPERATION HD Radio™ AM/FM Tuner Operation Connecting the HDM90  (sold separately) Display HD Radio Tuning HD Seek Mode Auto Station Store Setting HD Radio Presets Recalling an HD Radio  Multicast Preset HD Radio operation requires connecting the HDM90 HD Radio tuner (sold separately). Refer to the HDM90 instructions for connection details. When the unit is tuned to an HD Radio station, press DISP to...
  • Page 11 XHDR6435. A new list called "Tagged" will appear in iTunes, giving you the option to purchase each song.
  • Page 12: Troubleshooting

    XHDR6435 OPERATION iTunes  Tagging Operation (HDM90) ® Troubleshooting Displayed Message There is a compatibility issue with the iPod device that is connected. Check the list of compatible iPod devices below. CHECK iPod VER If the attached iPod device is compatible, update the firmware to the latest version using iTunes.
  • Page 13: Cd Player Operation

    Pause Repeat Random Intro CD-R/CD-RW Compatibility XHDR6435 OPERATION CD Player Operation With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc.
  • Page 14 XHDR6435 OPERATION  CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc Displaying Information  Song Title Icon  Artist Icon  Folder Icon  File Icon  Character Support When an MP3/WMA encoded disc is first inserted, “CD PLAY” will appear in the display. Depending on the number of files and folders, this may take several seconds. Press DISP to select between the following:...
  • Page 15 Step 1 Step 2 Step 3 Step 4 XHDR6435 OPERATION MP3/WMA CD mode features a file and folder search mode. This search allows navigating through folders to find a specific MP3 or WMA file for playback. Press SELECT. "MP3 CD SEARCH" will appear, then a list of the files in the currently selected directory will be accessible.
  • Page 16 XHDR6435 OPERATION  CD Player Operation - MP3/WMA Files Folder Access  Repeat Random Intro Press to select the previous folder. Press to select the next folder. Note: Folder access is only available on MP3/WMA discs recorded with more than one folder. Press RPT to enter the Repeat menu, then turn the volume ...
  • Page 17 CD Player Operation - MP3/WMA Files Media Compatibility Playback Order Compatible Recording  Formats XHDR6435 OPERATION The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
  • Page 18 XHDR6435 OPERATION  CD Player Operation - MP3/WMA Files Additional MP3/WMA  Information Sampling Frequency  Rates Transfer Bit rates MP3 Tag Display Recommended Settings An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
  • Page 19 XHDR6435 OPERATION USB Operation - MP3/WMA Files Play MP3/WMA files from most mass storage devices by connecting them to the XHDR6435's USB port. When a USB device is first connected, “READING” will appear in the display and playback will begin momentarily. Depending on the number of files and folders, it may take several seconds for the device to begin playing.
  • Page 20 XHDR6435 OPERATION USB Operation - MP3/WMA Files Displaying Information    Song Title Icon  Artist Icon  Folder Icon  File Icon  Folder Access  Repeat Random Intro When a file is accessed, the clock and elapsed time will be displayed. Press DISP momentarily to select file name (default), song title, artist, track number or clock & elapsed time.
  • Page 21 XHDR6435 OPERATION USB Operation - MP3/WMA Files Character Support Maximum character display information • Track name – 32 character maximum • Directory name – 32 character maximum • *Song title – 30 character maximum • *Artist name – 30 character maximum *Song title and artist name will only be displayed if included with the MP3/WMA file.
  • Page 22 XHDR6435 OPERATION USB Operation - MP3/WMA Files Additional MP3/WMA  Information Sampling Frequency Rates Transfer Bit rates MP3 Tag Display Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play non-MP3/WMA files with the MP3/WMA extension. 8kHz ~ 48kHz...
  • Page 23: Operation Of Ipod

    The XHDR6435 features a direct USB control system for iPod. To play music from an iPod device, connect the USB cable (included with your iPod device) to the XHDR6435 USB port. Once connected, READING will appear in the display. Playback will begin automatically. If a song is playing on the iPod device before it is connected, it will continue to play.
  • Page 24 XHDR6435 OPERATION Operation of iPod               Song Select   Fast Forward and  Reverse Pause Repeat Random Intro Character Support Device Compatibility Note Press to skip to the beginning of next song. Press to return to the beginning of current song. Pressing again skips to the beginning of previous song. Press and hold song.
  • Page 25 Overview Connecting a Bluetooth device requires first installing and connecting the Dual BTM60 Bluetooth interface module (sold separately). When connected to a Dual Bluetooth ready head unit, the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution profile) and AVRCP (audio video remote control profile).
  • Page 26 XHDR6435 OPERATION Bluetooth  Operation (BTM60) ® Function Press appear on the display. Input the desired phone number using the 0-9, *, # buttons on the Making a Phone Call remote control. Press A phone call may also be placed from your mobile device using the keypad, phone book or speed dial. When a call is placed from a mobile device, “DIALING”...
  • Page 27 Auto Answer AUTO ANS BT SPKRS Bluetooth Audio BT SPKRS *See page 7 for Setup Menu navigation. XHDR6435 OPERATION Bluetooth to begin dialing the selected number while it is displayed. again to return to the first call. Bluetooth Options Enables the BTM60 Bluetooth Interface Module. The Bluetooth icon will flash every 10 seconds.
  • Page 28 XHDR6435 OPERATION Bluetooth  Operation (BTM60) ® Bluetooth Streaming Audio Operation The BTM60 Bluetooth module (sold separately) supports A2DP (advanced audio distribution profile) wireless streaming audio from your Bluetooth mobile device directly to your head unit. You can also control your music from the front panel of the head unit using AVRCP (audio video remote control profile).
  • Page 29: Troubleshooting

    INVALID appears  on display Unit will not accept  a disc NO SUPPORT appears  An invalid ID3 tag version is present on display XHDR6435 OPERATION Cause voltage Red wire not connected or incorrect voltage Black wire not connected Fuse blown Speaker wires not connected Yellow or red wire touching chassis...
  • Page 30: Limited One Year Warranty

    This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
  • Page 31: Fcc Compliance

    Consult the dealer or an experienced radio/TV technician for help. Power Output: 18 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) XHDR6435 OPERATION CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
  • Page 32: Specifications

    7" x 7" x 2" (178 x 178 x 51 mm) Design and specifications subject to change without notice. Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2010 Dual Electronics Corp. All rights reserved. developer to meet Apple performance standards. by the developer to meet Apple performance standards. NSA0410-V01 10Hz-20kHz >65dB 1 Bit...

Table of Contents