Dual XHDR6435 Installation & Owner's Manual page 8

Cd receiver with detachable face
Table of Contents

Advertisement

XHDR6435 OPERATION
General Operation
Escape
Press ESC to exit any menu adjustment mode.
Audio
Press AUDIO/MENU momentarily to select between Bass,
Treble, Balance, Fader, EQ, Subwoofer* and Source Volume
Level.
BASS
TREBLE
BALANCE
FADER
EQ
SUBWOOFER*
SOURCE LEVEL
Bass
Press AUDIO/MENU until BASS appears, then rotate
the volume knob left/right to adjust (-6 minimum / +6
maximum).
Treble
Press AUDIO/MENU until TREBLE appears, then rotate
the volume knob left/right to adjust (-6 minimum / +6
maximum).
Note: Bass and Treble settings are saved as the USER EQ
setting.
Note: Bass and Treble settings are retained for each mode
individually.
Balance
Press AUDIO/MENU until BALANCE appears, then rotate
the volume knob left/right to adjust (BALANCE LEFT 12
to BALANCE RIGHT 12). BALANCE EVEN represents equal
balance.
Fader
Press AUDIO/MENU until FADER appears, then rotate the
volume knob left/right to adjust (FADER FRONT 12 to FADER
REAR 12). FADER EVEN represents equal fader.
EQ
Press AUDIO/MENU until EQ appears. Rotate the volume 
knob left/right to
select between FLAT (default), POP, JAZZ,
CLASSIC, BEAT, ROCK and USER equalization curves. Press
SELECT to confirm. Any manual adjustment to the Bass or
Treble settings are automatically saved as USER.
Press AUDIO/MENU until SUBWFR appears, then rotate the
Subwoofer
volume knob left/right to adjust (0-12). Adjusting levels to 0
turns the subwoofer off.
The source volume level control allows a gain adjustment for
Source Volume Level
each audio source: AM, FM, CD, AUX, USB, operation of iPod
and Bluetooth. Set the source volume level for each mode,
depending on the relative volume of each audio source.
To set the source volume level, press AUDIO/MENU until
SOURCE LEVEL appears. After one second, the current
mode will appear on the display. Turn the volume knob to
adjust the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation, press MODE until the
desired mode is selected, then set the source volume level
for that mode.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents