Cd Player Operation - Dual XHDR6435 Installation & Owner's Manual

Track Select
Fast Forward and Reverse
CD-R/CD-RW Compatibility
Insert CD With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Press EJECT to eject the CD. The unit will change to
Eject CD
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
Press TRACK
track. Press TRACK
current track. Pressing TRACK
beginning of the previous track.
Press and hold TRACK
or reverse a track.
Press
Pause
Press
Repeat Press RPT to enter the Repeat menu, then turn the volume
knob to select one of the following options:
• OFF -
• TRACK - Continuously repeats selected track.
Press RDM to enter the Random menu, then turn the
Random
volume knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL- Plays all tracks in random order.
Note: Random mode is retained in memory when selecting
between other modes and when the unit is turned on/off.
Press INT to enter the Intro menu, then turn the volume
Intro
knob to select one of the following options:
• OFF - Cancels the INT function.
• ALL - Plays the first 10 seconds of each track.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method.
In addition, the following CDs may be incompatible with
this unit: CDs exposed to extreme temperatures or direct
sunlight for extended periods of time, CDs recorded in
which a recording session failed or a re-recording was
attempted and encrypted or copy-protected CDs that do not
conform to the audio CD-DA red book recording standard.
XHDR6435 OPERATION
CD Player Operation
ll
to skip to the beginning of the next
nn
ll
l
/ II to temporarily stop CD playback.
l
/ II again to resume playback.
Plays all tracks on disc.
to return to the beginning of the
nn
again skips to the
nn
or TRACK to fast forward
13