Trip Computer - Audi allroad 2001 Owner's Manual

CONTROLS AND EQUIPMENT

Trip computer

This feature generates much helpful infor­
mation by simple touch control. For the driv­
er's convenience, the computer's memory
display window is integrated in the instru­
ment cluster.
The
computer function
are located in the windshield
switches
wiper switch lever.
The switches are functional only when the
ignition is turned on. Depressing the upper
or lower edge of the rocker switch (see ar­
row in illustration) will display functions ei­
in
ther forward or reverse order.
1 46
The "Reset" touch control on the
bottom of the switch serves several
functions.
By depressing " Reset" for
"driving time", "average fuel consump­
tion", and "average driving speed" can be
reset.
The "miles or kilometres to empty" display
cannot be reset.
By pushing " Reset" briefly, the computer's
alert signal for driving time can be inter­
rupted.
The digital display in the instrument cluster
can be switched on and off by pressing the
" Reset" button briefly.
When the ignition is switched on,
display shows the function that was last se­
lected.
control
All the stored values are cancelled if the bat­
tery is disconnected.
seconds, the
2
The trip computer has five display modes:
the
Instantaneous fuel consumption
•
Miles or kilometres to empty
•
Driving time (maximum range is
•
hours:
23
Average fuel consumption
•
Average driving speed
•
The instantaneous fuel consumption is
shown in the illustration by way of an exam­
ple.
minutes)
59