Table of Contents

Advertisement

CONTROLS AND EQUIPMENT
Turn the rotary button to place the selec­
tion arrow in front of
Date.
If an empty box appears in front of
press the rotary button. Now a check mark
will appear (see illustration)
cently set date will appear i n the setting
menu.
Turn the selection button to put the arrow
next to the date display and press the but­
ton -+ the day will begin to flash.
136
Now set the date as follows:
- Rotate the button clockwise or counter­
clockwise until the correct number for
Date,
the day appears. Enter this number by
the most re­
pressing the button - the setting mode
-->
will then skip to the month -+ the number
of the month will begin to flash.
Now select the month as described
above and enter by pressing the button
.... . the number of the year will begin to
flash.
Now the final step is to select the year
and to confirm your selection.
to leave the setting menu, place the arrow
and press the rotary button .... . the set�
Back
ting menu will move back to the next higher
level.
Note
I f you wish, you can use the
to set the time in a similar manner.
menu
Clock

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents