Speed Warning 2 - Audi allroad 2001 Owner's Manual

Cancelling speed limit
Press the test button for at least 1 second
when the y ehicle is moving at a speed
above miles The display will
(5 km/h).
3
show the warning symbol crossed through
to confirm that the speed limit has been
cleared.

Speed warning 2

When the ignition is switched off, the driver
can store a
permanent speed limit
in the unit.
warning
The warning is shown in the display as de­
scribed. The warning symbol only goes out
once the road speed has fallen below the
stored value again.
We recommend to store this speed limit
v:' arning if you wish to be reminded of a par­
ticular speed limit in addition to speed limit
warning (For instance when driving in
1 .
countries with general speed limits or
particular speed should not be exceeded
when winter tires are fitted, etc.)
Selecting speed limit
Press the test button briefly with the
•
ignition switched off.
corder display will then light up.
Press the test button again and hold for
•
at least seconds. The speed limit currently
2
set appears in the display.
To change the speed limit, press the top
•
or bottom of the function selector switch for
the trip computer (see arrow illustration).
8 2
The speed limit displayed will then increase
or decrease by miles (1
6
CONTROLS AND EQUIPMENT
if
a
A few seconds after the button is re­
•
The mileage re­
leased, the display lighting goes out again.
Cancelling speed limit
P _r ess the
tion sw1tched off;
up. Press the test button again for at least
seconds: the display will show the .speed
2
limit currently set. Now press and hold the
" Reset" button for the trip computer until
the crossed-out warning symbol appears.
km/h) at a time.
0
test button br iefly
with the igni­
.
the display will light
145