Level-Setting Procedure - PRESONUS StudioLive ARc Series Owner's Manual

2 Getting Started
2.1

Level-Setting Procedure

6. If your microphone requires phantom power, engage the 48V button on
your StudioLive ARc mixer.
7. Turn on your amplifier or powered monitors.
8. Speak or sing into your microphone at approximately the same volume you
expect during the performance.
9. Turn the trim knob on Channel 1 clockwise while watching the signal
indicator. Adjust the Channel 1 trim knob until the signal/clip indicator is
red, then back down until it is green and just below clipping at the loudest
input level.
10. Raise the Channel 1 level control to unity gain (denoted with a "U").
11. Bring up the Main level until you can comfortably listen to your microphone
through your speakers.
12. Sculpt the sound by adding EQ to taste.
StudioLive ARc Series
™
Owner's Manual
4