Toyotomi ENSO Series User Manual page 61

AIR PURIFIER
How to order new fi lters:
Contact customer care department:
SERVICE / SPARE PARTS
G.E. DIMITRIOU A.E.E.
KIFISOU 6 AVENUE, EGALEO, ATHENS
Tel: +30 210 5386490
Fax: +30 210 5313349
Or, through our website:
http://www.toyotomi.gr
Cleaning of the Intelligent Particle Sensor
Clean the air quality sensor every 6 to 8 weeks.
When the value of PM 2.5 is displayed incorrectly, a clean cotton swab can be
used to clean the sensor lens very carefully.
• Carefully remove the cover of the sensor.
• Clean the sensor lens gently, with a cotton swab as indicated by the arrow.
• Install the cover of sensor.
• DO NOT wipe the sensor lens with alcohol or other organic solvent.
Attention! If the humidity in the room is very high, there is a risk of condensation
on the air quality sensor. This may cause the air quality indicator (the digital
display of the particle measurement) to indicate that the air quality is poor,
while this should not be that case. In this case, we recommend that you clean
the air quality sensor or do not use the air purifi er in automatic mode.
GB
61