Toyotomi ENSO Series User Manual page 55

AIR PURIFIER
POWER CORD
1. Remove the glue from the power plug at the bottom of the device. Remove
the cover from the special channel of the device. (Figure 2) Insert the tip of
the power cord into the plug (as shown in Figure 1).
2. Put the power line through the special channel in order for the cord to be
stable and emplace back the cover of the special channel.
3. Put the power plug in the socket
4. CAUTION When transporting the device, make sure that the power cord is
connected to the plug.
5. ATTENTION Do Not pull the Power Cord.
55
GB