Chauvet COLORado PXL Bar 16 User Manual page 38

Dimmer Speed
To set the dimmer speed, do the following:
1. Go to the Setup main level.
2. Select Dimmer Speed.
3. Select Smooth or Fast.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the COLORado PXL Bar 16.
1. Go to the Setup main level.
2. Go to the PWM Option main level.
3. Select PWM frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).
Cell Order
To set how the light is activated, follow the instructions below:
1. Go to the Setup main level.
2. Select Cell Order.
3. Choose 1–16 (light activates from left to right) or 16–1 (light activates from right to left).
Calibrated White
When activated, calibrated white sets the light output temperature to 7500K. To set the calibrated white
setting, do the following:
1. Go to the Setup main level.
2. Select Calibrated White.
3. Select ON (activates calibrated white), OFF (deactivates calibrated white), or Custom (adjust light
output temperature using the White Balance setting).
White Balance
To set the maximum values of a given LED color to create a white light output, follow the instructions below:
1. Go to the Setup main level.
2. Select White Balance.
3. Select the color value to be changed (Red, Green, Blue, or White).
4. Set the color value, 000–255.
Preset Functions
The COLORado PXL Bar 16 has three presets. Every time a settings is changed in the fixture, the current
preset is updated to include that change. To load a preset, do the following:
1. Go to the Setup main level.
2. Select Preset Select.
3. Select the preset to load (PRESET A, PRESET B, or PRESET C).
4. The selected preset will load, and all changes made to the settings will save to that preset.
Presets can be uploaded to other COLORado PXL Bar 16 using a DMX connection. To do so:
1. Connect the DMX Out of the product that has the desired presets to the DMX In of the product to
be updated.
2. Power on both products.
3. On the product with the desired presets, go to the Setup main level.
4. Select Preset Sync.
5. Select NO (do not upload settings) or YES (upload settings).
Reset Functions
To reset the tilt, zoom, or all functions as if from startup, follow the instructions below:
1. Go to the Setup main level.
2. Select Reset Function.
3. Select the function to be reset (Tilt, Zoom, or All).
4. Select NO (do not reset) or YES (reset).
Factory Reset
To restore the COLORado PXL Bar 16 to factory default settings, do the following:
1. Go to the Setup main level.
2. Select Factory Settings.
3. Select NO (do not reset) or YES (reset to factory default settings).
Page 34 of 40 COLORado PXL Bar 16 User Manual Rev. 1
Operation