Table of Contents
Advertisement
4. O
PERATING
Manual Remote Operation (FC-M) (Optional)
1.
Plug in the fog machine to power and turn the power switch to the fixture on.
2.
Plug in the wired manual remote to the Manual Controller socket on the rear of the
fog machine.
3.
Press the single button located on the remote to trigger the fog output.
The button is momentary, which means that the fog machine will only output while the button
is pressed. Once the button is released, the fog will stop outputting.
Timer Remote Operation (FC-T) (Standard)
This mode will allow you to control the fogger manually, set the fog machine to run
continuously, or to set the fog machine to run off bursts with adjustable interval and
duration settings.
1.
Plug in the fog machine to power and turn the power switch to the fixture on.
2.
Plug in the timer remote to the Manual Controller socket on the rear of the fog
machine.
3.
Press the TIMER ON/OFF button on the timer remote. The LED above the button
should light, indicating activation of function.
4.
You may now set the INTERVAL & DURATION adjustment knobs to the desired
position.
The INTERVAL is the time between bursts of fog.
The DURATION is the time the fog machine will run during the burst.
Interval
Adjustment
Timer LED
Indicator
Manual/Power
LED
Timer Latching
Button
Hurricane™ 1300 User Manual
I
NSTRUCTIONS
9
Duration
Adjustment
Manual
Momentary LED
Manual control
Momentary
Continuous
Latching Button
Rev. 6
Advertisement
Table of Contents
