Advertisement
ENGLISH
Sound output from the DVD-2800's digital audio output connectors
2
Audio recording format
Digital out : Normal
Dolby Digital
Digital out : PCM conversion
Digital out : Normal
DTS
Digital out : PCM conversion
Digital out : Normal
DVD video
MPEG audio
DVD audio
Digital out : PCM conversion
(video part only)
LPCM conversion mode :OFF
48 kHz
LPCM conversion mode :ON
96 kHz
LPCM conversion mode :ON
CP : ON
LPCM conversion mode :OFF
CP : OFF
LPCM conversion mode :OFF
Video CD
MPEG 1
Music CD
Linear PCM
MP3 CD
MP3
• Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit,
providing higher sound quality than music CDs.
• When "OFF" is selected, digital signals are not output from the digital audio output at this time.
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
Set the "AUDIO SETUP" default setting as shown below.
(See page 23.)
• "DIGITAL OUT"
"PCM"
"LPCM SELECT"
"ON"
Playing DVDs with incorrect settings may result noise that
could damage your ears or the speakers.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" comply
with your TV's video format. When the TV is PAL formated,
set to PAL. (See page 22.)
B
8
9
Digital audio input connector (OPTICAL)
Digital audio input connector (COAXIAL)
NOTES:
In some cases, track numbers may not be assigned automatically when conducting digital recording onto a connected
component while playing a CD on the DVD-2800.
• When conducting digital recording onto an MD recorder, use the editing function to divide the tracks after recording is
completed.
• When conducting digital recording onto a CD recorder, set the CD recorder's recording setting to manual and assign the
track numbers (track marks) manually during recording.
8
Refear to
Sound output
Digital audio data output
page
Dolby Digital bitstream
2 channels PCM data (48 kHz/16 bit)
23
DTS bitstream
DTS bitstream
2 channel PCM data (48 kHz/16 bit)
23
2 channel PCM data (48 kHz/16 bit)
48 kHz/16 bit ~ 24 bit PCM
48 kHz/16 bit PCM
23
48 kHz/16 bit PCM
No output data (when copy protected)
96 kHz PCM (when not copy protected)
44.1 kHz/16 bit PCM
44.1 kHz/16 bit PCM
32 ~ 48 kHz/16 bit PCM
TV
VIDEO IN
DVD-2800
COMPONENT
VIDEOOUT
AUDIO
DIGITAL OUT
VIDEO
Y
OUT
(PCM/BITSTREAM)
OUT
P
/C
OPTICAL
COAXIAL
B
B
L
P
/C
R
R
R
S-VIDEO
OUT
(6) Connecting to a Stereo Component
DVD-2800
COMPONENT
VIDEOOUT
AUDIO
DIGITAL OUT
VIDEO
Y
OUT
(PCM/BITSTREAM)
OUT
OPTICAL
COAXIAL
P
B
/C
B
L
P
/C
R
R
R
S-VIDEO
OUT
NOTE:
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is PAL formated,
set to PAL. (See page 22.)
5
PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power button
• Press once to turn the power on.
• Press again to set to the "OFF" position and turn the
power off.
• Set the power to the standby mode by pressing the
POWER button on the remote control unit while the
power is on.
• Turn the power on from the standby mode by
pressing the POWER button on the remote control
unit.
w
Power indicator
• This indicator lights when the power is on and when
the power is in the standby mode.
e
HDCD indicator
• This indicator lights when playing discs recorded in
®
HDCD
format. (NOTE 1)
r
Progressive Scan indicator
• Lights when progressive is selected as the video
output.
t
Disc tray
• Load discs here. (See page 10.)
y
• Press the OPEN/CLOSE button
to open and close
the disc tray.
• The disc tray is also closed when the PLAY button
is pressed.
y
OPEN/CLOSE button (
5
OPEN/CLOSE)
• Press this button to open and close the disc tray.
(See page 10.)
TV
VIDEO IN
Stereo component
u
PLAY button (
PLAY)
1
• Press this button to play the disc. (See page 11.)
i
STILL/PAUSE button (
STILL/PAUSE)
3
• Press this button to pause images or music and to
play images frame by frame. (See page 12.)
o
STOP button (
STOP)
2
• Press this to stop the disc. (See page 12.)
!0
Skip button (
)
8
• Press this to move back to the beginning of the
current track (or chapter).
• Press again to move back to the beginning of the
previous track (or chapter). (See page 12.)
!1
Slow/Search button (
)
6
• Press this to set the slow play mode and to search in
the reverse direction. (See page 12.)
!2
Skip button (
)
9
• Press this to move ahead to the beginning of the next
track (or chapter). (See page 12.)
!3
Slow/Search button (
7
)
• Press this to set the slow play mode and to search in
the forward direction. (See page 12.)
!4
Remote control sensor
!5
Display
u
• Information on the disc that is currently playing is
shown on the display. (See page 9.)
Advertisement
Chapters
