Advertisement
ENGLISH
4
CONNECTIONS
• Read the manuals of all the components when making
connections.
• Keep the power cord unplugged until all connections have
been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
(1) Connecting a TV
• Use the included audio video cord to connect the TV's video input connector and audio input connectors to the DVD-2800's
VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
DVD-2800
AUDIO
DIGITAL OUT
VIDEO
OUT
(PCM/BITSTREAM)
OPTICAL
COAXIAL
L
R
S-VIDEO
VIDEO IN
S-VIDEO IN
L
R
AUDIO IN
• Connect the DVD-2800's video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the
copy prohibit system may cause disturbance in the picture.
6
NOTES:
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power cord together with connection cords
may result in humming or noise.
COMPONENT
VIDEOOUT
Y
OUT
P
/C
B
B
P
/C
R
R
OUT
S-Video output connector
The video signals are divided into color (C) and
brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector,
we recommend connecting it to the DVD-2800's S-
Video output connector using a commercially available
S-Video connection cord.
TV
NOTES:
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to
comply with your TV's video format. When the TV is PAL
formated, set to PAL. (See page 22.)
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (P
The red (P
/C
R
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y/R-Y, B-Y and Y/C
Connect in this way if your TV is compatible with Progressive Scan.
To power outlet
AC IN
DVD-2800
NOTES:
• Use the three commercially available video cords to connect the DVD-2800's color component output connectors to the TV
or monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is PAL formated,
set to PAL. (See page 22.)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated only)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD
DEFINITION" OUTPUT.
/C
, P
/C
and Y)
R
R
B
B
), blue (P
/C
) and brightness (Y) signals are output independently, achieving more faithful
R
B
B
, C
and Y, etc.). For details, refer to the TV's operating instructions.
R
B
COMPONENT
VIDEOOUT
AUDIO
DIGITAL OUT
VIDEO
Y
OUT
(PCM/BITSTREAM)
OUT
P
/C
OPTICAL
COAXIAL
B
B
L
P
R
/C
R
R
S-VIDEO
OUT
L
R
AUDIO IN
, P
and
R
B
AC IN
To power outlet
TV
P
/C
P
/C
Y
R
R
B
B
COMPONENT VIDEO IN
Advertisement
Chapters
