Motorola P Series Selling Manual page 20

2-8
3.2.4 Programmable Side Buttons
The two programmable side buttons may be programmed (using the CPS) to allow quick and easy
activation of up to four functions. Each button can activate two different functions by differentiating
between a short and a long press:
Short Press - quickly pressing and releasing the buttons.
Long Press - pressing the button for a deÞned period of time (set using the CPS) before
releasing.
Please note that some functions (ie. Monitor and Volume Set) are activated by a "press and hold"
button operation. In this case, the button does not differentiate between a short and long press and
can only be programmed to activate the single function.
The two side buttons are physically separated by a moulded ridge in the radio housing, allowing the
user to easily locate the required button without having to look at the radio. Typically, the user will be
able to feel this ridge even while wearing gloves.
Quick Þngertip identiÞcation of the correct button is further assisted by the different texture patterns
moulded onto the buttons themselves.
To eliminate user uncertainty, the radio provides audio feedback to indicate whether the button
activation has been successful:
single high pitch
single high pitch tone/double high pitch tone
single low pitch tone
Table 2-8 Tx Battery Operation (Continued)
LED State/Colour
Continuous ORANGE
Continuous RED
Flashing RED
Table 2-9 Side Buttons Audio Feedback
Tone Format
Indication
Battery half charge level
Low battery charge level
Very low battery charge level
Meaning
OK
toggle function on/off
failure
FEATURES AND BENEFITS