Technical Description Of The Burner; Burner Designation; Models Available - Riello RLS 310/EV O2 MX Modulating Operation

4

Technical description of the burner

4.1

Burner designation

Range: R
Fuel:
R LS 310
BASIC DESIGNATION
*The burner leaves the factory set up for FS1 op-
eration. If FS2 operation is required, refer the spe-
cific manual to LMV 5...
WARNING
4.2

Models available

Designation
RLS 310/EV O2 MX
RLS 410/EV O2 MX
RLS 510/EV O2 MX
RLS 610/EV O2 MX
Technical description of the burner
S Natural gas
L Light oil
LS Gas oil / Methane
N Heavy oil
Size
Adjustment : E
EV
M
P
E O
2
EV O
2
Emission:
EV O MX TC FS1/FS2* 3/400/50
2
EXTENDED DESIGNATION
Voltage
3/400/50
3/400/50
3/400/50
3/400/50
Electronic cam
Electronic cam and variable speed (with Inverter)
Mechanical cam
Proportional air/gas valve
Electronic cam and suitable for Oxygen Control (O
Electronic cam and variable speed (with Inverter) and suitable for Oxygen Control O
C11 o ... ... Class 1 EN 267 - EN676
Class 2 EN 267 - EN676
C22 o MZ
C33 - BLU Class 3 EN 267 - EN676
C23 - MX Class 2 EN 267 - Class 3 EN676
Head : TC Standard head
TL Long head
Flame control system:
FS1 Standard (1 stop every 24 h)
FS2 Continuous working (1 stop every 72 h)
Electrical supply of the system:
3/400/50
3/230/50
230/50/60
Start-up
Inverter
Inverter
Inverter
Inverter
7 GB
)
2
3N / 400V / 50Hz
3 / 230V / 50Hz
Voltage of auxiliaries:
230/50/60 230V / 50-60Hz
110/50/60 110V / 50-60Hz
20182022
20182023
20182024
20182026
2
Code
Tab. A
20182250