Technical Description Of The Burner; Burner Designation - Riello RS 310/E O2 ULX Installation, Use And Maintenance Instructions

3

Technical description of the burner

3.1

Burner designation

Range: R
Fuel: S
L
LS Light Oil/Natural gas
N
Size:
R S 510 E O2
BASIC DESIGNATION
*The burner leaves the factory set up for FS1 op-
eration. If FS2 operation is required, refer the spe-
cific manual to LMV 5...
WARNING
20205906
Technical description of the burner
Natural gas
Light Oil
Heavy Oil
Adjustment:
BP
M
E
EV
EVi
E O
2
EV O
2
P
Emissions:
ULX TL
EXTENDED DESIGNATION
Two stage (light oil / proportional valve (gas)
Mechanical cam
Electronic Cam
Electronic cam and variable speed (with Inverter)
Electronic cam with integrated Inverter
Electronic cam and suitable for Oxygen Control (O
Electronic cam and variable speed (with Inverter) and suitable for
Oxygen Control O
2
Proportional air/gas valve
... -
C01 Class 1 EN676
MZ - C02 Class 2 EN676
MX - C03 Class 3 EN676
BLU - C03 Class 3 EN676
FGR Ultra low NOx - Flue Gas Recirculation
ULX Ultra low NOx - Flue Internal Recirculation
Head: TC
Standard combustion head
Long combustion head
TL
Flame control system:
FS1 Intermittent operation (1 stop every 24 h)
FS2 Continuous operation (1 stop every 72 h)
FS1/FS2* 3/400/50
6 GB
)
2
Electrical supply of the system:
3/400/50 3N / 400V / 50Hz
3/230/50 3/230V / 50 Hz
Voltage of auxiliaries:
230/50/60 230V / 50-60Hz
110/50/60 110V / 50-60Hz
230/50/60