Table of Contents
Advertisement
When Not Using Printer for a Long Period of Time
> When the printer will not be used for a prolonged period of time, follow appropriate procedures before
storing the printer according to the expected storage period and storage conditions. When in doubt, create
a ticket at
WARNING:
Every 2 Weeks of Inactivity Checklist
INK & SOLUTIONS STORAGE
CMYK & White Inks, Cleaning Solution, Maintenance Solution & Pretreatment
Solution should be stored at a temperature range between a minimum of
32°F and a maximum of 104°F.
> Be carefull NOT to go below 32°F.
> Please ROTATE the White ink pouch boxes every week.
HOW TO EXTRACT A LOG FILE FROM THE PRINTER
Insert a USB stick in the front slot of the printer to be able to copy the log file and follow these steps:
Menu
18
BrotherDTG.com/Support
DO NOT turn the printer OFF, otherwise, the printer may become DAMAGED.
The printer can be restored to operational status after the storage
period by performing the following maintenance tasks before storage:
• Please empty the Waste ink Tank.
• Check the amount of Cleaning Solution in the cleaning liquid
tank and refill the tank if its amount is below the proper level.
• Thoroughly clean the Nozzle Guards, Wipers, Suction Caps and
Exhaust Caps.
• Print out a Nozzle Check pattern for White and CMYK.
• If a non-firing nozzle is found: Perform Head Cleanings, run the
Nozzle Check prints and verify the result again. Continue same
process until the blocked nozzles are ALL OPEN again.
• Leave printer powered on to continue White Ink Circulations.
Maintenance
for support.
Log copy to USB
Cleaning
Solution
Refill
Advertisement
Table of Contents
