Table of Contents
Advertisement
INPUTTING METHOD
• Select the number on the tank where the ink level makes contact
• If the liquid is on the border, please select the larger number
CALIBRATION FAQ
Question:
indicated remaining ink on the display and on the tanks are not different?
Answer:
YES. Even if there is no shift at present, all colors need to have calibration
performed for them once a month. This will prevent a shift from occurring. The reason for
performing all colors at the same time is to prevent the number of warnings from increasing.
Question:
Answer:
Enter the menu again and select "Remaining sensor correction". Then re-enter the
correct values for all colors.
BEST PRACTICE FOR PRINTING - A MUST!
Good
Gap
> Always keep the closest distance between the printheads and the surface of the garment.
It is very important for the long life of your printer.
10
Is it necessary to perform calibration for all colors once a month even though the
What if the printer operator inputs the wrong number?
Excessive
Gap
Advertisement
Table of Contents
