Table of Contents
Advertisement
WEEKLY MAINTENANCE: Nozzle Guard Cleaning
Wipe clean the 2 nozzle guards
Make sure to clean and remove any dried ink in the nozzle guard port holes. Clean the
(4)
(5)
metallic parts
&
A very important place to clean is area
Be sure NOT to touch the nozzle surface
> Manually move the carriage to such a position that you can perform the cleaning with ease.
In case of Warning/Error messages for parts replace, please follow the following procedures:
• Wiper Cleaner Replacement
• Flushing Foam Replacement
• Fan Filter Replacement
> Always use this menu to perform cleanings or replace parts:
Menu
Maintenance
(1)
(2)
with the Clean Stick R dipped in Cleaning Solution.
&
of the printhead in the same way.
(6)
between the nozzle guard and nozzle plate.
(3)
MAINTENANCE PARTS EXCHANGE
Maintenance Part Clean/Replace
at all.
> DO NOT empty the remaining Cleaning
Solution from the Cleaning Cup into the
Maintenance station. Empty it into the
Waste Tank below the printer.
WARNING
You will have 15 minutes to complete
any pending items for the maintenance
process. Prepare to complete all items
within the allotted time.
15
Advertisement
Table of Contents
