Operation; Pump Dashboard - Pentair STA-RITE INTELLIFLO3 VSF User Manual

4

OPERATION

Pump Dashboard
The Pump Dashboard is your pump's home page. Basic pump info, run status and programming can be viewed from
this screen.
If any pump alerts and problems are present they will also display at the top of this screen.
1− Device Settings: Tap to display the Device
Settings screen.
Most of the pump features and settings can be
accessed from the Device Settings screen. Refer
to Device Settings, page 6.
2− Enabled/Disabled Toggle: Tap to enable or
disable your pump.
A DISABLED pump will not start until this toggle
is switched to ENABLED or the pump ON/STOP
button is pressed.
3− Current Status: Displays the current pump state.
IDLE: The pump is not currently running a
program.
PROGRAM: Displays the program currently
running.
4− Next Program: Displays the next program
scheduled to run after completion of the current
program or idle.
If all programs are programmed manual or timer
"No Programs are Scheduled" will display.
5− Run Data: Displays estimates of the pump's
current flow, power consumption and overall
system pressure.
6− Program Tabs: Displays all pump Programs and
their individual settings.
Tap a Program Tab to edit or start a program.
Refer to Program Setup, page 5 for
programming instructions.
Note: Quick Clean will always display as a
program tab and cannot be removed from the
Pump Dashboard. Quick Clean is programmed
similarly to a Timer program.
7− Edit/Run Program Tabs: Displays when a
Program Tab is pressed.
EDIT: Tap to open the Program Setup screen.
Refer to Program Setup, page 5.
RUN NOW/STOP: Tap to manually start or stop
a pump program.
INTELLIFLO3™ VSF and INTELLIPRO3™ VSF Variable Speed and Flow Pump User' s Guide
3
4
5
6
7
FIGURE 6
1
2