Unit Operation Based On The Effective Heat/Cool Output - Trane Tracer ZN.520 Manual

CNT-SVX04A-EN
Appendix

Unit operation based on the effective heat/cool output

Table 70 Unit operation based on the effective heat/cool output
Application Heat/cool
mode input mode input
(nviApplicMode) (nviHeatCool)
Auto Auto
Heat
Morning warm
up
Cool
Night purge
Pre-cool
Off
Test
Emergency heat
Fan only
Auto Not present
1
Note : Use of heat for supply air tempering and dehumidification remains available.
2
Note : Night purge, Emergency heat, and Null modes are not supported by the Tracer ZN.520 zone
controller. If one of these modes is received by the controller, it is interpreted as Auto.
Effective heat/ Unit operation
cool mode
output
(nvoHeatCool)
Determined by Fan-enabled
controller Heating-enabled
Cooling-enabled
Damper-enabled
Heat Fan-enabled
Heating-enabled
Cooling-disabled
Damper-enabled
Morning warm Fan-enabled
up Heating-enabled
Cooling-disabled
Damper-disabled
Cool Fan-enabled
Heating-disabled
Cooling-enabled
Damper-enabled
2 Determined by Fan-enabled
controller Heating-enabled
Cooling-enabled
Damper-enabled
Pre-cool Fan-enabled
Heating-disabled
Cooling-enabled
Damper-disabled
Off Fan-disabled
Heating-disabled
Cooling-disabled
Damper-disabled
Test Fan-enabled
Heating-enabled
Cooling-enabled
Damper-enabled
Determined by Fan-enabled
2
controller Heating-enabled
Cooling-enabled
Damper-enabled
Fan only Fan-enabled
Heating-disabled
Cooling-disabled
Damper-enabled
Determined by Fan-enabled
controller Heating-enabled
Cooling-enabled
Damper-enabled
1
1
103