Clarion NP401 Owner's Manual & Installation Manual page 46

• Bluetooth connection and communication status
6.1.1.1 GPS position quality and Vehicle type
indicator
This area is a multiple status indicator, and also
acts as a button that opens the Quick menu.
GPS reception quality shows the current accuracy
of the position information.
Icon Description
Clarion Mobile Map has no
connection to the GPS receiver:
GPS navigation is not possible.
Devices with a built-in GPS receiver
are permanently connected. On
such devices, the icon does not
appear in normal circumstances.
Clarion Mobile Map is connected
to the GPS receiver, but the signal
is too weak and the receiver cannot
determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received.
Position information is available,
but elevation (altitude) cannot be
calculated.
GPS navigation is possible, but the
position error may be significant.
Altitude information is available, the
position is a 3D position.
GPS navigation is possible.
The remaining part of the field shows the vehicle
type used for route calculation.
46 NP401
Icon Vehicle type
Car
Taxi
Bus
Emergency vehicles
6.1.1.2 Status indicator strip
This is a multiple status indicator. It indicates the
following status information on a single strip:
Icon
color
The sound output of Clarion Mobile Map
White
is muted.
The sound output of Clarion Mobile Map
White
is enabled.
Clarion Mobile Map records a Track log
Redblinking
when GPS position is available.
Red
Track log recording is disabled.
Gray
The Bluetooth radio is switched off.
The Bluetooth radio is turned on but no
Purple
telephone is connected.
Red There is an error in the Bluetooth connection.
Clarion Mobile Map is connected to a telephone
Green
as a handsfree set via Bluetooth.
Blue
A phone call is in progress over the Bluetooth
6.1.1.3 Phone call in progress
When connected to a cell phone as a hands-free
device with a phone call in progress, the
button appears on the Map screen. Tap this button
to hang up the call.
Description
,