Selecting The Destination With Saved Poi Search Criteria; Selecting The Destination From The History - Clarion NP401 Owner's Manual & Installation Manual

detour it adds to the active route. This can be
useful if you search for a later stopover that
causes only a minimal detour, for example
upcoming gas stations or restaurants.
3. You can narrow the search with the following:
• Select the POI group (e.g. Accommodation),
and after that, if needed, select the POI
subgroup (e.g. Hotel or Motel).
• To find the POI by its name, tap
and use the keyboard to enter a part of the
name.
• To list all POIs in a given POI group, tap
.
4. [optional] When finally the list of results appear,
you can sort the list:
• : s o r t t h e l i s t a l p h a b e t i c a l l y
(available when you search around a single
location)
• : sort the list by the distance from
your current position in a straight line (available
when you search around a single location)
• : sort the list by the distance to
drive on route from your current position
(available when you search along the active
route)
• : sort the list by the size of the
needed detour (available when you search
along the active route)
5. Tap the desired POI in the list.
6. Review the details of the selected item and tap
.
7. The map appears with the selected point in
the middle. Tap
36 NP401
5.1.5 Selecting the destination with saved
POI search criteria
POI search criteria can be saved in the POI section
of the Manage menu, but Clarion Mobile Map is
already shipped with some saved criteria you can
,
use instantly when searching for a POI.
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons:
2. Tap
3. Select one of the saved criteria, and the list of
4. Tap the desired POI in the list.
5. The map appears with the selected point in
5.1.6 Selecting the destination from the
History
The destinations that you have set earlier appear in
the History.
The procedure is explained starting from the
Navigation menu.
1. Tap the following buttons:
(Simple mode) or
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
mode), or , (Advanced mode).
.
matching POIs appears.
the middle. Tap
(Advanced mode) from the Cursor
menu. The route is then automatically calculated,
and you can start navigating.
mode), or ,
(Simple
(Simple mode) or
(Simple
(Advanced mode).