Table of Contents
Advertisement
The following area appears next to the above described rounded area. When tapping this area, the result
depends on the information currently shown.
Icon
Information
There is no valid
GPS position
Traffic restriction
Second route event
,
(maneuver after the
next maneuver)
Approaching
a Road Safety
Camera
Stops the running
simulation
Route recalculation
progress
Indicator strip
Details
If there is no valid GPS position,
this symbol appears here.
When GPS position is available but
there is no route to be navigated,
the traffic restriction of the
upcoming intersection is shown
here if there is any.
When GPS position and an active
route are both available, this field
shows the route event that follows
the next route event shown in the
above described area.
This icon appears when you
are approaching a Road Safety
Camera, and the warning for
cameras is enabled in Settings.
This icon appears during Route Fly
Over, Route Simulation, and Track
Log playback.
During route recalculation, this field
shows the recalculation progress
between 0% and 100%.
- sounds muted/enabled
- Track Log recording
- Bluetooth status
Action
Tap this area to open the GPS
Data screen to check the signal
status or the connection settings.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
Tap this area to suppress the
audible camera warning.
Tap again to display the second
route event with the possibility to
open the Itinerary.
Tap this area to stop the
simulation.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
NP401
19
Advertisement
Table of Contents
