Central Pneumatic 94446 Assembly And Operating Instructions Manual page 3

8. do not overreach
across running machines or air hoses.
Maintain tools with care
9.
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by a qualified technician. The handles
must be kept clean, dry, and free from oil and grease at all times.
10. disconnect air supply
remove adjusting keys and wrenches
11.
removed from the tool or machine work surface before plugging it in.
12. avoid unintentional starting
it is plugged in or not.
13. Stay alert . Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
14. Check for damaged parts
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn On and Off properly.
guard against electric shock
15.
pipes, radiators, ranges, and refrigerator enclosures.
replacement parts and accessories
16.
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool. Approved accessories are available from Harbor Freight Tools.
17. do not operate tool if under the influence of alcohol or drugs
if taking prescription medicine to determine if your judgement or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
Use proper size and type extension cord
18.
compressor, it must be of the proper size and type to supply the correct current to the
tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause
electrical damage to the tool. Check your compressor's manual for the appropriate size
cord.
Note: Performance of the compressor (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool performance.
19. Maintenance . For your safety, maintenance should be performed regularly by a qualified
technician.
20. Compressed air only
Warning: the warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. it must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SKU 94446 For technical questions, please call 1-800-444-3353.
. Keep proper footing and balance at all times. Do not reach over or
. Keep tools clean for better and safer performance. Follow
. Disconnect air hose when not in use.
. Do not carry any tool while holding the trigger, whether
. Before using any tool, any part that appears damaged
. Prevent body contact with grounded surfaces such as
. When servicing, use only identical replacement
. Never use combustible gases as a power source.
. Check that keys and adjusting wrenches are
. If an extension cord is required for the air
. Read warning labels
Page 3