CDA HVN 32 Series Installation & Use Manual page 15

Error Code on the Display/s
If an error message appears on the display/s (the display/s show/s "
another character alternating - e.g. "
1. Disconnect the cooktop from the mains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if the problem does not appear the
cooktop can be used.
4. If the problem does not disappear repeat step from 1 to 3.
5. If the problem continues, disconnect the cooktop from the mains and
contact your Authorised Service Centre.
Important: In the case of error message "
see notes at page 6.
Display/s OFF or Not Correctly Operating
If a display or the displays are only partially lit or not lit.
1. Switch off the cooktop and disconnect it from the mains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if the problem does not appear the
cooktop can be used.
4. If the problem does not disappear repeat step from 1 to 3.
5. If the problem continues, disconnect the cooktop from the mains and
contact your Authorised Service Centre.
F A F
" and " ", " " and "
F L
" and " " or "
F
" and
0 .....
", ) :
F
" and " "
15