Appendix; Garmin Powerswitch; Mounting Considerations; Mounting The Device - Garmin OVERLANDER Owner's Manual

Hide thumbs Also See for OVERLANDER:

Table of Contents

Appendix

WARNING

Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems

install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can

cause bodily injury.

You can use a connected Garmin PowerSwitch device to control lights, fans and more from your Overlander

device.

• The device must be mounted close to the battery and within the range of the supplied power cable.

• The mounting surface must be strong enough to support the weight of the device.

• The location must allow room for the routing and connection of all cables.

Before you can mount the device, you must select a mounting location and purchase the appropriate hardware

for your mounting surface.

NOTICE

Avoid wires, gauges, air bags, air bag covers, heating, ventilation, and air conditioning and other items when

drilling pilot holes and attaching the mount to the vehicle. Garmin is not responsible for any damages or

consequences arising from the installation.

1 Place the mount on the selected location.

2 Using the mount as a template, mark the two screw locations

3 Drill pilot holes (optional).

For some types of mounting material, drilling pilot holes is necessary. Do not drill through the mount.

4 Securely fasten the mount to the surface using the appropriate hardware for your mounting surface.

Appendix

Table of Contents