Calibrating The Compass; Inreach Remote; Connecting An Inreach Device; Sending An Inreach Message - Garmin OVERLANDER Owner's Manual

Calibrating the compass

Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near metal objects or
objects that influence magnetic fields, such as vehicles, electronic devices, buildings or overhead power lines.
When your device is connected to the magnetic mount, it uses GPS data to determine your compass heading.
When you remove the device from the magnetic mount, it uses a built-in compass to show your heading.
Each time you disconnect your device from the magnetic mount, the device prompts you to calibrate the
compass. If you experience irregular compass behaviour, for example, after moving long distances or after
extreme temperature changes, you can manually calibrate the compass to improve accuracy.
1 Disconnect the device from the magnetic mount and move away from objects that influence magnetic fields.
2 Select > Calibrate Compass.
3 Follow the on-screen instructions.
The inReach remote function allows you to control your inReach device using your Overlander device. You can
send messages, view weather reports, trigger an SOS alert and more. Go to
inReach device.

Connecting an inReach Device

1 Bring the inReach device within 3 m (10 ft.) of your Overlander device.
2 On your Overlander device, select
3 Select the Explore tab.
4 Select inReach.
5 Follow the on-screen instructions on your Overlander device to complete the pairing process.
After the pairing process is complete, the inReach and Overlander devices connect automatically when they are
within range.

Sending an inReach Message

Before you can send an inReach message using your Overlander device, you must pair it with a compatible
inReach device (Connecting an inReach Device, page
You can use your device to send inReach messages to your contacts.
1 Select > > inReach >
2 Select to add one or more contacts.
3 Enter a message.
4 Select Send.

SOS

During an emergency, you can contact the GEOS International Emergency Rescue Coordination Center (IERCC)
to request help. Pressing the SOS button sends a message to the rescue coordination centre, and they notify the
appropriate emergency responders of your situation. You can communicate with the rescue coordination centre
during your emergency while you wait for help to arrive. You should only use the SOS function in a real
emergency situation.
38
NOTICE

inReach Remote

.
38).
.
buy.garmin.com to purchase an
inReach Remote