Assembly; Tools Needed - RIDGID R4231 Operator's Manual

TOOLS NEEDED

T20 Torx Wrench
4mm Hex Wrench
Flat Head Screwdriver
17mm Combination Wrench
10mm Combination Wrench
T40 Torx Wrench (L-Shape)
• DO NOT attempt to modify this Tool or create accessories not recommended for use with this Tool. Any such alteration or
modification is misuse and could result in a hazardous condition.
DO NOT connect to power supply until assembly is complete. Failure to comply could result in accidental starting.
•
DO NOT start the Miter Saw without checking for interference between the Blade and the Miter Fence. Damage could result to
•
the Blade if it strikes the Miter Fence during operation of the Saw.
• ALWAYS re-check for interference when changing miter angle.
• The Saw can tip over if the Saw Head is released suddenly and the Saw is not secured to a work surface. ALWAYS secure this
Saw to a stable work surface before any use.
If any parts are damaged or missing DO NOT operate this tool until the parts are replaced. Please call RIDGID
•
Service at (toll free) 1-888-359-4778.

ASSEMBLY

(for the dust port adapter)
Figure 4
12
Framing Square
Combination Square
Customer
®